Control Cables

Control Cables are manufactured in accordance with international standards, including cables that meet the European international standards of VDE Standard Control Cable, British Standard Control Cable, Italian Standard Control Cable, French Standard Control Cable, and IEC Standard Control Cable, as well as American Standard Control Cable, Canadian Standard Control Cable, as well as Japanese Standard Control Cable and Australian Standard Control Cable. We can also customize control cables according to your needs.

These cables are designed for a wide range of industrial process automation applications, including signal transmission, measurement, control, and regulation. These control cables are commonly referenced, such as mechanical, motor, and robotic cables. They are also known as multicore cables, control flex cables, and control flex cables. Depending on their construction characteristics, these flexible cables are suitable for light, medium, or high mechanical stress. They also offer varying degrees of protection against electrical interference and resistance to corrosive substances and oils.

Control cables – VDE standards

YY cable (YSLY / HSLH)

CY cable (YSLCY / HSLCH)

SY cable (YSLYSY / HSLHSH)

-Flexible shielded cable with galvanised steel wire braid for additional mechanical protection

-Screened and shielded cable for applications where moderate mechanical stress and electromagnetic screening is required

LiYY cable

-Unscreened and unshielded cable for light duty in dry and humid environments

LiHH cable

-Unscreened LSZH low capacitance control

-Screened LSZH data transmission cable

H05VV5-F cable
-Spezial-PVC control cable with oil resistant outer sheath

Control cables – Standard IEC 60502

CVV Control cable

–For supervisory electrical equipment, station control circuits, and outdoor, suitable installation in dry or wet cable trenches.

CVV-S/ CVV-SB Control cable

–For supervisory electrical equipment, station control circuits, and outdoor, suitable installation in dry or wet cable trenches.

–For use in duct, tray, and for direct burying in ground. The cable subjected to immerse in water all the line.

Control cables – Italian Standard CEI 20-205/CEI 20-222

A05VV-F Control Cable–Suitable in dry and humid locations for connections of electrical appliances submitted to medium-level mechanical strength.
A03VV-F Control Cable–Suitable in dry locations for connections of portable electrical appliances submitted to weak mechanical strength.
FROR 450/750v Control Cable–Flexible multicore cable, flame retardant, and with reduced emission of corrosive gases.

Control cables – Standard UL 1277/UL44

THHN/THWN-2 Cable THHN/THWN-2 Screened Cable
THHN/THWN-2 Unscreened Cable
XHHW-2 copper wire XHHW-2 Unscreened Cable
CU FRXLPE CPE-TP CONTROL CABLE CU FRXLPE CPE-TP Shielded Control cable/ Unshielded Control cable
CU FRXLPE CPE-TS CONTROL CABLE CU FRXLPE CPE-TS Control cable
CU FRXLPE LSZH-TP CONTROL CABLE CU FRXLPE LSZH-TP Shielded Control cable/ Unshielded Control cable
CU FRXLPE PVC CONTROL CABLE CU FRXLPE PVC Shielded Control cable/ Unshielded Control cable
CU PE/PVC CONTROL CABLE CU PE/PVC Shielded Control cable/ Unshielded Control cable

Control cables – Standard ASNZS 5000.1

0.6-1kV Multi-core and E Control Cables
0.6-1kV XLPE Insulated, PVC Sheathed Unarmored Multicore control Cables
0.6-1kV Multicore and E Armored Control Cables

Control cables – CSA standards

Armoured Control Multi-Conductor (600V)Control cable